Whether you are learning to hover or fly freestyle every weekend, FPV Stuff is a place to practice, build and tune.
Flying
- Acro, Angle and Horizon on the switches you choose
- Betaflight-style rates, PIDs and modes, with a CLI to paste in your diff or copy one out
- Digital HD or analog video feed
- OSD layout editor with three profiles
- FPV and chase camera
Fly setup
Pick a spot, a mode (free flight, race or freestyle), your quad and where to start, then take off. Or hit Ready to fly and you are back in the air with your last setup in one click.
Workbench
About a hundred parts: frames, motors, props, batteries, stacks, cameras, video and more. Build anything from a 65 mm whoop to a 5 inch freestyle quad, or start from one of four stock drones: a whoop, a cinewhoop, a race quad and a freestyle quad. Every build and stock drone sits in one overview, and you name your own. Weight, thrust to weight, hover throttle and flight time update with every part you swap, and one key takes the build into the air. Save your builds and share them as short codes.
Setup
Plug in your radio over USB or use a gamepad. The setup maps your sticks and switches as you move them, in any stick mode.
Spots
- A field with a dirt track
- A three storey bando
- A race track with 12 gates, lap times and splits against your best lap
Replays
Every flight is recorded. Watch it back from your goggles, a chase cam or a free camera, scrub through it and slow it down.